FRP chemical storage tank is a storage tank for storing various chemical liquids. In daily use, we should follow the following principles:

1. Storage tanks for flammable gases and liquids should be equipped with necessary fire-fighting equipment. It is strictly forbidden to smoke in the tank, open fire and heat, and bring the fire source into the tank area.

2. Storage tanks that store flammable, explosive, toxic, corrosive and other media shall strictly comply with the relevant regulations on the management of dangerous goods.

3. Before the maintenance of the storage tank, the power supply of the electrical equipment related to the storage tank must be cut off, and the equipment handover procedures must be handled.

4. After the medium in the tank is used up, the inlet and outlet valves should be closed or blind plates should be added to block the pipes and equipment connected to the tank, and obvious isolation signs should be set up.

5. Storage tanks containing flammable, corrosive, toxic and suffocating media must be replaced, neutralized, disinfected, cleaned, and analyzed and inspected after treatment. The analysis results should meet the requirements of relevant norms and standards. It is strictly forbidden to use air instead of flammable media.

6. A work permit must be obtained to work in a tank. If the operation is interrupted for a long time for some reason, the "In-tank Operation Permit" should be re-applied.

7. Sampling and analysis 30 minutes before entering the tank, the oxygen content is 18-23% (volume ratio).

8. Wear personal protective equipment when entering the tank to clean up toxic and corrosive residues.

9. Scaffolding and lifting devices must be firm and reliable. It is strictly forbidden to throw materials and tools in and out during operation to ensure safe operation.

10. When hot work is required in the tank, a hot work permit must be obtained.

11. In-tank operations must be set up with monitors and reliable contact measures must be taken.